Landscape Repairs in the Illawarra: Walls, Drainage and Damage


Most landscape repairs come down to one question: is this a surface fault you can patch, or a sign that water or soil is pushing something out of place? A hairline crack in a brick garden wall and a retaining wall that has started to lean look similar from the lawn, but they need very different fixes. Repair the cause, usually water behind the wall or a failing footing, and the wall lasts. Patch only the symptom and the crack returns.
This guide is for homeowners, property managers and business owners around Wollongong, Shellharbour, Kiama and Berry who want to understand what they are looking at before they call a landscaper. It covers block retaining walls, brick garden walls and the drainage that sits behind both.
TL;DR
Work out the cause before the repair. Water trapped behind a wall is behind most failures, so drainage comes first and patching comes second.
Hairline cracks are common and often cosmetic. Cracks wider than a few millimetres, horizontal cracks, bulging or any visible lean need proper investigation.
Walls around 1 m high or more, walls near a boundary or a building, and walls that are moving may need an engineer and council involvement.
A repair that matches the existing mortar, blocks and finish looks better and holds up better than a quick patch.
On Common Ground Landscapes builds and repairs retaining walls, block and brick work and drainage across the Illawarra and Shoalhaven, and quotes each site individually.
Table of Contents
What “landscape repairs” usually means
The phrase covers a lot of ground, but the jobs that people most often need done fall into a few groups:
Retaining walls: leaning, bulging, cracked or separated blocks, loose caps, and soil escaping through the face.
Brick and block garden walls and garden beds: cracked bricks, crumbling mortar, loose capping, and walls that lean.
Drainage: pooling at the base of a wall, downpipes discharging in the wrong place, and slopes that shed water toward a structure.
Hard surfaces: sunken or lifted pavers, loose tiles, and decking or pergola timber that has weathered.
Soft landscaping: patchy turf, failed irrigation and bare garden beds.
Walls and drainage get the most attention here because they are the repairs where a wrong diagnosis costs the most. A lifted paver is a quick fix. A wall holding back a slope is a structure, and the quality of its repair affects the safety of whatever sits above and below it.
Reading the damage: cracks, lean and moisture
Before anyone picks up a trowel, the damage needs reading properly. Three things matter: how wide the cracks are, whether anything is moving, and where the water is going.
How wide is the crack?
Not every crack is a problem. The Tasmanian government’s Guide to Standards and Tolerances is a useful yardstick for masonry walls, and it sorts damage into categories:
Crack width | What it generally means | Typical response |
Under 0.1 mm (hairline) | Negligible | Nothing needed |
Under 1 mm | Does not need repair | Keep an eye on it |
Under 5 mm (Category 2) | Defective, minor | Minor repair such as repointing, and monitor for 12 months |
5 to 15 mm (Category 3) | Needs investigation | Stabilisation and possibly replacing a section of wall |
15 to 25 mm (Category 4) | Severe, often with noticeable lean or bulging | Investigation and significant repair |
The guide is written for building standards in Tasmania, so treat it as a reference point rather than a legal test in New South Wales. Its logic carries across, though: the wider the crack, the more likely the cause is structural and the less likely a surface patch will hold.
Is the wall moving?
Width matters less than movement. A crack that is widening, a wall face that bulges, joints that are opening up, or a wall that leans forward are all signs the wall is being pushed. For brick garden walls, UK government guidance on garden wall safety gives some figures for a leaning wall that is considered dangerous: more than 30 mm for a half-brick wall, 70 mm for a single-brick wall and 100 mm for a brick-and-a-half wall. It advises getting expert advice in those cases, which may include checking the foundations. That guidance is British, but a plumb line and a tape measure are the same everywhere. It also says horizontal cracks through a wall and cracks near piers or gates need expert advice, and that you should not repoint a wall before the cause of the cracking is known.
A simple habit helps. Photograph the crack with a ruler beside it, mark the date, and look again after the next heavy rain. A crack that has grown tells you far more than one that has not.
Where is the water going?
Water is the most common culprit behind a failing retaining wall, because soil that is saturated is much heavier than soil that is dry, and the wall has to hold all of it back. Things to look for on a site visit:
Weep holes (the small openings along the base of some walls that let water out) that are blocked or no longer running.
White powdery deposits on the face of the wall, known as efflorescence, which show that water is passing through the masonry.
Damp patches or staining on the face after rain has stopped.
A downpipe or stormwater outlet that discharges close to the wall.
Garden beds or paving that slope toward the wall and send water into the soil behind it.
Pooling at the base of the wall.
If you spot several of these, the wall is probably under more load than it was designed for, and the repair has to deal with that load.
Why drainage comes before patching
A cracked retaining wall that is patched but not drained will usually crack again, because the thing that cracked it is still there. A sound repair relieves the pressure first.
Manufacturer installation guidance for block retaining walls shows what good drainage looks like. Adbri Masonry’s retaining wall installation guide specifies 10 to 20 mm blue metal drainage gravel backfilled at least 300 mm wide behind the wall, with a 100 mm drainage pipe behind the first course that outlets through the wall at every low point and every 20 m of wall length, and around the ends to the stormwater system. The same guide calls for the backfill to be compacted as it goes in.
In a repair, that translates into a few practical steps:
Find where the water enters. Check the roof downpipes, the slope of the ground above the wall and any irrigation that sprays near it.
Redirect surface water so that it does not run over or behind the wall.
Clear or install subsurface drainage at the base of the wall, with a gravel surround and a clear outlet.
Replace heavy, clayey backfill with free-draining material where the wall has to be opened up.
Only then repair the wall itself.
This order is why a repair quote for a wall often includes drainage work. It is not an add-on. It is what stops the same failure happening again. If you are weighing up a quote, drainage solutions for yards and retaining walls are part of what we do at On Common Ground, and we look at the water path as part of the site assessment.
Block retaining wall repair
Segmental block walls, including the concrete garden-wall blocks common in Illawarra yards, fail in a handful of predictable ways.

Loose or displaced blocks. Usually the result of poor compaction behind the wall, or water washing fines out of the backfill. The repair involves removing the affected courses, correcting the base and drainage, and relaying the blocks level in a running bond pattern, where each block sits across the joint below it. National Masonry’s installation guide calls for the first course to be level side to side and front to back, because everything above is built on it.
Cracked blocks or mortared joints. Fine, stable cracks can be filled. Wider cracks or cracked blocks mean the unit is replaced, and the question becomes why it cracked.
Bulging or leaning walls. This is the repair homeowners most often underestimate. A wall that has moved forward has usually lost its footing support or been overloaded by water. Patching the face does nothing. It typically means dismantling and rebuilding the affected section, or the whole wall, with proper drainage and, where required, an engineer’s design.
Damaged caps. Loose caps let water in from the top. Re-fixing or replacing them is a small job that prevents a bigger one.
A block wall repair is also a chance to make the wall look right. Matching the blocks, colour and finish to the rest of the garden takes judgement, and it is one reason the finished result differs from one contractor to the next. We build and repair retaining walls across Wollongong and the Illawarra and brick garden beds and block walls, using local materials and proven techniques chosen for long-term durability.
Repairing a brick garden wall
Brick garden walls are simpler than retaining walls, because they usually hold nothing back. That makes the repair more straightforward, but the same rule applies: find the cause first.
Crumbling mortar. Over time, mortar weathers and the joints open. UK guidance suggests a simple test: if you can scrape mortar out with a door key, repointing may be needed. Repointing means raking out the loose mortar and filling the joints with fresh mortar. The new mortar should match the old in colour, strength and joint profile. The Tasmanian standards guide treats a mortar repair that does not match the existing mortar as closely as practicable as defective, and suggests that where an exact match is not possible, a natural break such as a joint or downpipe can be used to limit the visual impact.

Cracked bricks. A single cracked brick can be cut out and replaced. A crack that runs through several courses suggests movement in the footing or the ground, and that has to be understood before any brickwork is touched.
Loose or damaged tops. The top of a wall takes the worst of the weather. Loose or damaged masonry near the top is often rebuilt rather than patched, and a capping or coping that sheds water protects the joints below.
Leaning walls. If a wall leans beyond the thresholds above, or if it is a long, tall run with no piers, rebuilding is more likely than repair.
If the wall is an important feature, such as a front fence wall, a courtyard boundary or a garden bed edge, the finish matters as much as the structure. Our stonework and stone wall cladding service can also refresh a tired wall face where repair alone would leave it looking patched.
When you need an engineer, and what the rules say
Some walls are not a landscaper’s call alone. The height of the wall, how close it is to a boundary or building, and what sits on top of it all affect whether an engineer needs to be involved.
The figures differ by state and council, which is why the first step is to check with your local council. A few examples show the pattern:
Hume City Council in Victoria says a retaining wall under 1,000 mm does not need a building permit when it is not associated with other building work or the protection of an adjoining property. It also notes that fully replacing a building element is treated as an alteration, not a repair.
Swan Hill Rural City Council, also in Victoria, says a building permit is required for a retaining wall 1 m or more in height, and for walls on or near boundaries at any height where adjoining property could be damaged.
Those are Victorian rules. In New South Wales, check with Wollongong, Shellharbour or Kiama council, or your certifier, before you commit to any work on a wall that is tall, near a boundary, or supporting a driveway, a house or a pool. Manufacturer guidance from National Masonry says councils generally require, and it recommends, that walls over 1.0 m high, and walls near loads such as a house or a car, are designed and certified by a suitably qualified engineer.
In practice, the following situations call for an engineer’s assessment before repair starts:
The wall is leaning, bulging or has cracks that are growing.
The wall is around 1 m or higher.
The wall is close to a boundary, house, driveway or pool.
Soil, water or a structure adds load above the wall.
A previous repair has failed.
The distinction matters because the repair of a structure that has been designed by an engineer must follow that design. A landscaper who works with engineers and councils, and who tells you plainly when a job needs one, is protecting you from paying twice.
What a proper repair quote should include
When you request quotes for wall or drainage repairs, the quote should read like a scope of work rather than a lump sum. Look for:
The diagnosis. What caused the damage, in plain language. If a quote does not say why the wall failed, it probably does not address it.
Drainage. What is being done about water, including outlets and where the water ends up.
The extent of rebuild. Which sections are being repaired, which are being replaced, and why.
Materials. The blocks, bricks, mortar and gravel, and how they match the existing wall.
Approvals. Whether council approval or an engineer’s design is needed, and who arranges it.
Access and site works. How materials come in, what happens to the soil and old blocks, and how garden beds and lawn are reinstated.
Sequence and timing. Which jobs come first, especially when drainage, walls and paving interact.
Because every site is different, repair work cannot sensibly be priced from a table. We quote after a detailed look at the site, and aim for clear communication and transparent quoting, with direct access to the experienced people doing the work.
Fix it once: how we approach repairs
On Common Ground Landscapes has been designing and building outdoor spaces since 2012, across the Illawarra and Shoalhaven. Our work covers the structural side of the garden, including retaining walls, brick and block work, stonework, paving and tiling, decking and pergolas, and drainage, as well as planting, turfing, irrigation and ongoing maintenance. Because design, construction and garden care sit under one roof, a wall repair can be planned alongside the drainage behind it and the garden in front of it.
If you have a wall that is cracking, leaning or shedding mortar, or a yard where water collects, start with a site conversation. Tell us what you can see, send photos, and we will explain what is likely behind it. You can reach us through the On Common Ground Landscapes website, or look at our pages for landscaping in Wollongong, Kiama, Gerringong and Berry, and Jamberoo.
Other landscape repairs worth planning together
Wall repairs rarely happen in isolation, and several related jobs are cheaper and neater done at the same time.
Paving and tiling. Sunken or lifted pavers often trace back to the same drainage problem that damages walls: water washing out the base. Relaying them on a corrected base means the surface stays level. See our paving and tiling work.
Decking and pergolas. Weathered boards, loose fixings and movement at posts are worth fixing before they become safety issues. We cover decking and pergolas as part of our outdoor builds.
Turf, mulch and planting. Once the structural work is finished, disturbed areas need reinstating. Turfing, mulching and replanting finish the job, and an irrigation system set up so it does not spray at walls protects the repair.
Ongoing maintenance. For property managers and business owners, regular garden care catches blocked drains, loose edging and failing beds early. Our garden care, design and makeovers page sets out what is available.
If a repair turns into a larger rethink, such as a redesign of a sloping yard, the same team can move from repair to design and construction without handing the site over to someone new.
FAQ
Can I repair a cracked retaining wall by filling the crack?
Only when the crack is fine and stable and the wall is not moving. Filling a crack in a wall that is under water pressure hides the symptom while the cause keeps working. Check for blocked weep holes, damp patches and any lean first, and have the wall assessed if the crack is widening.
How do I know if a brick garden wall needs repointing?
Loose, crumbling or sandy mortar, gaps in the joints and mortar that scrapes out easily with a key are the usual signs. Before repointing, work out why the mortar failed. If cracks run through the bricks as well, or the wall leans, the problem is likely deeper than the joints.
Do I need council approval to repair a retaining wall?
It depends on the wall’s height, its position and your council. Many councils ask for approval or an engineer’s design for walls around 1 m or higher, or close to a boundary or building. Check with your local council or certifier before work begins, and ask your landscaper who will arrange any approval needed.
Should drainage be fixed before the wall?
Yes. Water trapped behind a wall adds load and is behind most failures. Clearing or installing drainage and redirecting downpipes reduces that load, so the repaired wall is not stressed in the same way again.
Is a leaning wall repairable or does it need to be rebuilt?
A small lean in a low brick wall can sometimes be corrected, but a wall that has moved forward usually needs dismantling and rebuilding the affected section with proper footings and drainage. A tall wall, or one near a boundary or building, needs an engineer’s assessment first.
Sources
Recommended

Comments